When the transmission in the automobile needs to be replaced, it is costly. You can choose a new one or one that is rebuilt. To avoid this, change the fluid on a regular basis. According to the Salt Lake City UT transmission repair, that one thing will keep it operating smoothly.
Friction and high temperatures occur when the motor on a car is running. This all important fluid is going to fight the negative effects. You only have to change it one time in a year unless you drive over fifteen thousand miles. If you do, change it after every fifteen thousand miles.
Another precaution is to warm up the engine before putting your car in gear. You will frequently change gears from drive to reverse and vice versa. Never change gears until the car comes to a full stop. If you have reason to park on an inline, activate the emergency brakes.
A professional mechanic uses a device called the flusher to drain the old fluid before adding the new. You cannot do as thorough a job as the mechanic. Therefore, taking it in to the service shop for this function is best for your car.
You do not have to add to this fluid as you do with oil. If there is no leak, the level will stay the same until time for the change. Look to see if there is a leak when you check for an oil leak. If you have one, stop driving until you get it repaired. Otherwise, you can damage the transmission.
The manual version is different than the automatic. Driven a minimum number of miles it can be changed less frequently, up to sixty-thousand miles between changes. The automatic may never need to be changed. However, if a change is done, it will not cause any damage. There will be directions in your owners manual that comes with the car.
Friction and high temperatures occur when the motor on a car is running. This all important fluid is going to fight the negative effects. You only have to change it one time in a year unless you drive over fifteen thousand miles. If you do, change it after every fifteen thousand miles.
Another precaution is to warm up the engine before putting your car in gear. You will frequently change gears from drive to reverse and vice versa. Never change gears until the car comes to a full stop. If you have reason to park on an inline, activate the emergency brakes.
A professional mechanic uses a device called the flusher to drain the old fluid before adding the new. You cannot do as thorough a job as the mechanic. Therefore, taking it in to the service shop for this function is best for your car.
You do not have to add to this fluid as you do with oil. If there is no leak, the level will stay the same until time for the change. Look to see if there is a leak when you check for an oil leak. If you have one, stop driving until you get it repaired. Otherwise, you can damage the transmission.
The manual version is different than the automatic. Driven a minimum number of miles it can be changed less frequently, up to sixty-thousand miles between changes. The automatic may never need to be changed. However, if a change is done, it will not cause any damage. There will be directions in your owners manual that comes with the car.
About the Author:
Get super transmission service tips and more info about a reliable provider of Salt Lake City UT transmission repair services at http://www.jandgtransmissions.com right now.
No comments:
Post a Comment